Compukeel™ Templates and template kits are available for the New York 36 , Nelson Marek Morgan 36, and the Non Such 33.

If your boat has a lead keel and you would like a quotation for a Compukeel™ Template kit or assembled templates, please send, or e-mail the keel offset dimensions. These usually are available from the designer or manufacturer. If your boat has a cast iron keel, or the keel-offset data isn't available, you will want to use the Universal™ Template Kit.

If you would like assistance in selecting patterns for the Universal™ Template Kit, measure the keel chordlength at the top and bottom of the ballast, and the vertical distance between these chordlengths. Knowing the vertical distance between these two measurements will help determine the number of templates. To measure the chordlength, hook the end of a tape measure on the trailing edge of the keel. Pull the tape measure forward to the point of maximum keel thickness. From the point of maximum thickness forward, the tape measure should pulled forward parallel to the centerline of the boat. Sight across the tape measure to determine the location of the leading edge of the keel. Send us these dimensions in our Universal™ Template Kit patterns to use request form for a a recommendation on which patterns to use if you are having trouble deciding.

Follow this link for available chordlengths, pricing, and order form for the Universal™ Template kit.

If you have any questions, contact us using our on-line inquiry form, write us at COMPUTER KEELS COMPANY, P.O. Box 39757, Edina, MN 55439 or call (952) 829-5670, or e-mail: info@computerkeels.com

Updated November 7, 2014 © 1997-2014 Computer Keels Company All rights reserved